3D printing services in Barcelona
From prototype to short run, with a single point of contact and our own workshop.
Rapid prototyping
We turn your CAD into a physical part in 48 h so you can validate form, fit and ergonomics before committing to tooling. Built for product teams that iterate fast and need a supplier that is not the bottleneck.
- 24-48 h turnaround on most parts
- Technical review of every file before printing
- Volume pricing for repeat iterations
Short runs and on-demand production
From 10 to 500 units with consistent quality and automatic volume discounts. We produce in batches and keep your configuration on file, so a repeat order is a two-line email.
- Automatic discounts from 3 units
- Up to 20 % off on orders of 100+
- Dimensional checks on every batch
Electronics enclosures and cases
Custom boxes for your board, sensor or instrument, with the cut-outs exactly where your connectors are. In PETG or ABS depending on how hot the kit runs, with threaded inserts so it can be opened and closed a hundred times.
- Custom cut-outs for connectors, displays and LEDs
- M3 threaded inserts rather than tapping the plastic
- From one unit to short runs, with no tooling
Robotics and drone parts
Sensor mounts, chassis, grippers and housings in light technical plastics. We orient every part according to how it is loaded, because on a printed part orientation changes the strength more than the material does.
- Carbon fibre PLA for maximum stiffness at low weight
- Flexible TPU for feet, stops and vibration damping
- Custom jigs and fixtures for your own line
Spare and replacement parts
That discontinued plastic part holding up an entire machine. Send us the model, a dimensioned photo or the broken part itself and we reproduce it in an equivalent or better material.
- Reconstruction from the original part
- Heat-resistant engineering materials
- Advice on the right equivalent material
Architectural models
Massing studies, sections and detail models for architecture practices and competitions. Printed in uniform matte white or in contrasting materials to separate elements.
- Scales from 1:500 to 1:20
- Presentation-ready uniform finish
- Automatic splitting of oversized pieces
3D modelling and redesign
No file? We model the part from a sketch, a set of measurements or a photograph. We also optimise existing models so they print better and use less material.
- Fixed design quote before we start
- Source file delivered if you need it
- Optimisation to cut printing cost
Post-processing and finishing
Sanding, priming, painting and assembly. If your part is going in front of a client or an investor, we finish it like a product, not a prototype.
- Progressive sanding to 600 grit
- Painting in the RAL colour you specify
- Heat-set inserts and full assembly
Got your file ready?
Upload it now and have the price before you finish reading this sentence.
Calculate my quote